Practice for your Cisco 300-180 exam with the help of lead4pass. High quality Cisco CCNP Data Center 300-180 dumps vce youtube demo update free shared. New Cisco CCNP Data Center 300-180 dumps exam practice files in PDF format free download. “Troubleshooting Cisco Data Center Infrastructure” is the name of Cisco CCNP Data Center https://www.lead4pass.com/300-180.html exam dumps which covers all the knowledge points of the real Cisco exam. Latest Cisco CCNP Data Center 300-180 dumps pdf training resources download free try. 100% success and guarantee to pass Cisco 300-180 exam.
[Latest Cisco 300-180 dumps pdf practice files]: https://drive.google.com/open?id=0B_7qiYkH83VRaEF3S2oxQktHQ3c
[Latest Cisco 300-160 dumps pdf practice files]: https://drive.google.com/open?id=0B_7qiYkH83VRaThBc3h5VDkxZEE
New Cisco CCNP Data Center 300-180 Dumps Exam Practice Questions And Answers (Q1-Q20)
QUESTION 1
Refer to the exhibit.
When suspending or deleting VSANs, which three statements are true? (Choose three.)
A. You can delete only one VSAN at a time.
B. You must wait 60 seconds after you enter the vsan suspend command before you enter another command.
C. You must wait 120 seconds after you enter the vsan suspend command before you enter another command.
D. You can unsuspend only one VSAN at a time.
E. You can delete multiple VSANs as long as they are in the same domain.
F. You can delete multiple VSANs as long as they are in the same zone.
Correct Answer: ABD
QUESTION 2
Refer to the output.
feature otv
otv site-vlan 2
otv site-identifier 256
!
interface ethernet 2/0
ip address 192.0.2.1/24
ip igmp version 3
!
interface ethernet 2/1
ip address 192.0.2.2/24
ip igmp version 3
!
interface Overlay1
otv control-group 239.1.1.1
otv join-interface ethernet 2/0
otv extend-vlan 3-100
!
interface Overlay2
otv control-group 239.1.1.1
otv join-interface ethernet 2/1
otv extend-vlan 101-115
Which command best represents where the control plane configurations are applied?
A. switch(config-if-overlay)# otv isis hello-interval 30
B. switch(config-if)# otv isis hello-interval 30
C. switch(config-vlan)# otv isis hello-interval 30
D. switch(config)# otv isis hello-interval 30
Correct Answer: A
QUESTION 3
Refer to the exhibit.
A customer is having a problem with NPV. Which of these is the cause of the problem?
A. No server was requested or received by the FLOGI database.
B. One external link must be up for server interface to be up.
C. Multiple external links must be up for the server to come up.
D. Internal links are down and must be up for the server interface to be up.
Correct Answer: B
QUESTION 4
Which statement is true regarding the port channel 100 and 101 configurations between the Nexus 7010 switches?
A. The vPC assignments on N7010-C2 are incorrectly swapped
B. N7010-C1 is not allowing any active VLAN traffic to pass on Po100 and Po101.
C. LACP is not configured to initiate negotiations.
D. The vPC peer-keepalive is down between the two Nexus 7000 switches.
Correct Answer: A
QUESTION 5
Which three of these would cause two switch fabrics not to merge? (Choose three.)
A. Two or more switches do not have at least one assigned domain ID in common.
B. Two switches have different assigned VSANs on the connecting ports.
C. Two switches have different assigned VLANs on the connecting ports.
D. The static domain ID does not override the dynamic ID.
E. The election of the static domain is only determined by the WWNs of the two switches.
F. The physical connectivity between the two switches is not active.
Correct Answer: ABF
QUESTION 6
OTV is configured ?test pings confirm that it is working but other tests do not seem to perform well. 300-180 dumps What is the problem?
A. VLANs are not properly extended.
B. The multicast groups are not defined properly.
C. The transport network is not configured to process the overhead that is introduced by OTV.
D. The overlay may not be enabled.
Correct Answer: C
QUESTION 7
You are attempting to configure boot from SAN on your server that is attached to a Cisco MDS 9148 Fibre Channel switch. What is a possible issue that may occur?
A. Check the status of the licenses on the Fibre Channel switch.
B. NPV is not configured on the Fibre Channel switch.
C. NPIV is not configured on the Fibre Channel switch.
D. Boot from SAN is not supported via the Fibre Channel protocol.
Correct Answer: C
QUESTION 8
When you ping your new Cisco Nexus 7010 Switch, you see this output:
!!…!!…!!…!!…!!…
What could be the problem?
A. Traffic may be taking a bad route through the network.
B. HSRP is flapping.
C. CoPP is rate-limiting the pings.
D. The switch has high CPU utilization.
Correct Answer: C
QUESTION 9
If no traffic was ever sent across the overlay, what will the show mac address-table command on the OTV VDC indicate?
A. invalid command
B. the MAC address of the local OTV join interface
C. the system IDs of all the local OTV edge devices
D. the system IDs of all the local and remote edge devices in the overlay
E. all the MAC addresses learned on the extended VLAN
Correct Answer: B
QUESTION 10
Why do the lists not contain the same switches, after you issue the commands show cfs peers name and show cfs merge status?
A. The merge cannot occur until the VSAN IDs are synched.
B. The Cisco Fabric Services fabric has a physical port fault that should be investigated.
C. The fabric is partitioned into multiple Cisco Fabric Services fabrics.
D. Cisco Fabric Services need to be restarted to see the new switches.
E. A Cisco Fabric Services database lock has prevented the merge.
Correct Answer: C
QUESTION 11
Which command would you use to find the AED of an extended VLAN in a dual-homed site of an OTV network?
A. show otv aed on the AED
B. show otv site on any edge devices in the site
C. show otv vlan on the AED
D. show otv aed on any edge devices in the site
E. show otv vlan on any edge devices in the site
Correct Answer: C
QUESTION 12
Refer to the exhibit.
An administrator sets up a FabricPath network. The administrator tries to ping between two SVI interfaces on the leaf switches 10 and 20, but it fails. What caused the pings to fail?
A. Switches S10 and S20 do not have F2 modules.
B. The vPC peer gateway must be enabled on switches S10 and S20.
C. Switches S1, S2, and S3 should be interconnected directly.
D. VLAN 10 is not enabled on the spine switches (S1, S2, and S3).
E. Layer 3 over a vPC+ peer link is not supported.
Correct Answer: D
QUESTION 13
Which two commands will show all the OTV edge devices and their MAC addresses in the local site? (Choose two.)
A. show otv overlay
B. show otv site
C. show otv vlan
D. show otv adjacency
E. show mac address-table
Correct Answer: BD
QUESTION 14
Which command on a Cisco Nexus 5000 Series Switch will show the interface information for port 10 on the connected FEX 100?
A. show interface Ethernet 100/10
B. show fex 100 interface Ethernet 1/10
C. show interface Ethernet 100/1/10
D. show interface Ethernet 1/100/10
Correct Answer: C
QUESTION 15
What are three situations that may cause an ISSU failure? (Choose three.)
A. A module is removed while the upgrade is in progress.
B. A proper ISSU license is not in place.
C. The device has a power disruption while the upgrade is in progress.
D. A line card is in a failure state.
E. The specified system and kickstart images are not compatible.
F. The management interface is not in the correct VRF.
G. The secondary supervisor is not installed.
H. The redundancy force-switchover command was used during the ISSU.
Correct Answer: CDE
QUESTION 16
Which command helps to determine if there are any conflicts in the network with respect to a FabricPath configuration?
A. show licenses
B. show fabricpath conflict
C. show fabricpath conflict all
D. switchport mode fabricpath
Correct Answer: C
QUESTION 17
Your customer has a dual Cisco Nexus 7010 Switches in its data center. Customer’s representatives want to know how to determine if Cisco IOS ISSU is possible on the switches as they are upgrading to version 6.0.4. Which command is useful to determine if the upgrade will be non-disruptive?
A. N7010-C1# show system redundancy ha status
B. N7010-C1# show incompatibility system
C. N7010-C1# install all
D. N7010-C1# show issu test bootflash:n7000-s1-system.6.0.4.bin
Correct Answer: C
QUESTION 18
Which option describes why the merge status for any application shows “In Progress” for a prolonged period of time when a new switch is added to the fabric?
A. The new switch must be upgraded to match the same version of code as the original switch.
B. The ports between the switches are not trunking all VSANs.
C. The application needs to be started on both switches.
D. There are outstanding changes that must be committed.
E. The merge status cannot occur until a copy running-config startup-config is done.
Correct Answer: D
QUESTION 19
Which three statements are true regarding trunking on an ISL between two switches in order for the VSAN to be trunked? 300-180 dumps (Choose three.)
A. The VSAN must be defined on both switches.
B. The VSAN must be on the VSAN allowed list.
C. All VSANs that are being trunked must be using either enhanced or non-enhanced mode zoning, but not both.
D. IVR must be configured for Cisco Fabric Services.
E. The device alias database must successfully merge.
F. There cannot be any duplicate domain IDs within an individual VSAN.
Correct Answer: ABF
QUESTION 20
Refer to the exhibit.
An administrator is deploying FCoE; however, a VFC interface will not come up. The administrator executes the commandshow platform software fcoe_mgr info interface vfc and displays the output.
What is the problem?
A. An incorrect VSAN number is being used.
B. The connected host does not support FIP.
C. FCoE is not enabled.
D. Priority flow control is not being negotiated with the converged network adapter.
Correct Answer: B
Why Choose/Select Lead4pass?
Lead4pass is the best provider of IT learning materials and the right choice for you to pass Cisco 300-180 exam. Other brands started earlier, but the questions are not the newest and the price is relatively expensive. Lead4pass provide the latest real and cheapest questions and answers, help you pass Cisco 300-180 exam easily at first try.
Useful Cisco CCNP Data Center 300-180 dumps pdf practice materials and study guides free download from lead4pass. The best and most updated latest Cisco CCNP Data Center https://www.lead4pass.com/300-180.html dumps pdf training resources which are the best for clearing 300-180 exam test, and to get certified by Cisco CCNP Data Center. It is the best choice for you to pass Cisco 300-180 exam.
Best Cisco CCNP Data Center 300-180 dumps vce youtube demo:
https://youtu.be/X0PHRjzWlkU
Here Are Some Reviews From Our Customers:
You can click here to have a review about us: https://www.resellerratings.com/store/lead4pass