Practice for your Cisco 210-060 dumps exam with the help of lead4pass, at lead4pass you can find all the necessary things for yourself that will help you to pass Cisco 210-060 exam. “Implementing Cisco Collaboration De210-060vices v1.0” is the name of Cisco CCNA Collaboration https://www.lead4pass.com/210-060.html exam dumps which covers all the knowledge points of the real Cisco exam 210-060 CICD – Cisco. Download Cisco CCNA Collaboration real 210-060 dumps exam questions and verified answers. 100% passing guarantee and full refund in case of failure.
[Hot Cisco 210-060 dumps pdf training resources]: https://drive.google.com/open?id=0B_7qiYkH83VRSHJTTV9NMjQ0dmc
[Hot Cisco 210-260 dumps pdf training resources]: https://drive.google.com/open?id=0B_7qiYkH83VRcnI0SE83bHBvQ1k
Pass Cisco 300-208 dumps exam tests with best Cisco 300-208 dumps pdf study materials. The best useful Cisco CCNA Collaboration 210-060 dumps vce software online update free try.
Cisco CCNA Collaboration 210-060 Dumps Exam Questions And Real Answers (Q1-Q20)
QUESTION 1
The Voice engineer in your company need to change IP address destination on SIP-Trunk on near side?
A. reset trunk on near side
B. reset trunk on far side
C. reset trunk on far and near side
D. restart call manager service
Correct Answer: A
QUESTION 2
What is the recommended maximum one-way latency for voice and video networks?
A. 100 ms
B. 150 ms
C. 200 ms
D. 300 ms
Correct Answer: B
QUESTION 3
An end user has an 7945 IP phone, but is unable to launch any of the IP phone applications. A network engineer has confirmed that the device is subscribed to the appropriate applications in Cisco Unified Communications Manager.
How should the engineer instruct the user to launch the IP phone applications?
A. Select the “?” button on the IP phone.
B. Select the globe button on the IP phone.
C. Select Settings > User Preferences.
D. Select Settings > Device Configuration.
Correct Answer: B
QUESTION 4
Use the router console to view the configuration and answer the question.
When a call is placed from the Branch Router phone to the PSTN number of 914085551212, the call is failing. What dial-peer is supposed to be used and why is the call failing? Select 2 (two)
A. dial-peer voice 910 pots
B. dial-peer voice 9 pots
C. dial-peer voice 9001 voip
D. destination pattern is incorrect
E. prefix is missing from the dial-peer
F. the port assignment is incorrect in the dial-peer
G. the port number is missing in the dial-peer
Correct Answer: BF
Explanation:
The dial 9, 910, and 9001 dial peer configurations are shown below:
Here we see that dial peer 9 and 910 match the same destination pattern, but 9 will be used first. However, the port used should be 0/0/0:15 not 0/0/0:12. 210-060 dumps
QUESTION 5
An engineer receives a service ticket because a user cannot log into Cisco Unified CM User Options. Where can the engineer verify that the user account is active?
A. LDAP System Configuration
B. LDAP Directory
C. End User Configuration
D. LDAP Authentication
E. Route Plan Report
Correct Answer: C
QUESTION 6
A user reports that several IP phones in a single department are displaying a continuous “registering” message. Which fault domain should be investigated?
A. network router
B. Cisco Unified Communications Manager subscriber node
C. network switch
D. IP phones
E. SIP gateway
Correct Answer: C
QUESTION 7
User A notices echo on a call with user B. Both users are using Cisco VoIP phones. User B is using a headset, and user A is using a handset. What is the most likely source of the echo?
A. user A handset
B. user B headset
C. disabled echo cancellation on user A phone profile
D. disabled echo cancellation on user B phone profile
Correct Answer: B
QUESTION 8
What is needed to support SIP Early Media?
A. Media Termination Point
B. Transcoder
C. Annunciator
D. Conference Bridge
E. DSP
F. Route List
Correct Answer: A
QUESTION 9
Which three characteristics are associated with voice? (Choose three.)
A. greedy
B. TCP retransmits
C. UDP priority
D. delay sensitive
E. drop insensitive
F. benign
G. benign or greedy
Correct Answer: CDF
QUESTION 10
With GETVPN, if a key server is configured to use multicast as the rekey transport mechanism, then under which of these conditions will the key server retransmit the rekey messages?
A. It never retransmit the rekey messages
B. it only retransmit the rekey message when it does not receive the rekey acknowledgment from at least one group member
C. it only retransmit the rekey message when it does not receive the rekey acknowledgment from all group member
D. it only retransmit the rekey message when DPD to the group members fails
E. it always retransmit the rekey message
Correct Answer: E
QUESTION 11
In an effort to proactively manage IP telephony infrastructure, a network engineer wants to review usage reports that provide top five users, top five calls, and traffic summary. Which option describes where this information can be retrieved using Cisco Unified Communications Manager?
A. Navigate to Cisco Unified CM Administration > CDR Analysis and Reporting >System Reports > System Overview > Select desired reports.
B. Navigate to Cisco Unified Operating System Administration > Tools > System Reports > System Overview > Select desired reports.
C. Navigate to Cisco Unified Serviceability > Tools > CDR Analysis and Reporting > System Reports > System Overview > Select desired reports.
D. Navigate to Cisco Unified Reporting > Tools > System Reports > System Overview > Select desired reports.
Correct Answer: C
QUESTION 12
After getting reports that users cannot make calls out to the PSTN, a network administrator opens the Cisco Unified Communications Manager Administration web page and begins to review route patterns. Why would the administrator look
here when troubleshooting PSTN connectivity troubles?
A. A route pattern contains a list of gateways that can reach the PSTN.
B. A route pattern contains dial plan information for calling the PSTN.
C. A route pattern contains the necessary privileges for calling the PSTN.
D. A route pattern contains a list of SIP trunks that can reach the PSTN.
Correct Answer: B
QUESTION 13
An engineer is adding a third-party video endpoint to Cisco Unified Communications Manager. Which third-party device type should be used when adding the system?
A. SCCP
B. SIP
C. MGCP
D. H.323
Correct Answer: B
QUESTION 14
How can an administrator determine which codec is being used between two endpoints while a call is in progress?
A. Run the codec trace in Cisco Unified Communication Manager.
B. Use Cisco Unified Serviceability network trace.
C. Can only be seen in Cisco SDI traces.
D. Can only be seen in a sniffer trace.
E. Press the ? button twice on one of the IP phones.
Correct Answer: E
Explanation:
pressing the button (?) twice in quick succession during an active call.
QUESTION 15
Which three network elements are crucial when deploying VoIP devices? (Choose three.)
A. Round-trip time
B. QoS markings
C. Bandwidth
D. Ethernet
E. Fibre
F. Token ring
Correct Answer: ABC
QUESTION 16
Which type of data file is used for bulk import of users into Cisco Unity Connection?
A. .xls
B. .doc
C. .csv
D. .pdf
Correct Answer: C
QUESTION 17
To control telephony costs, management wants to restrict who can place long distance calls. Which two options allow for this restriction? (Choose two.) 210-060 dumps
A. calling search space
B. partitions
C. route groups
D. SIP trunk
E. gateway
Correct Answer: AB
QUESTION 18
An end user reports that conference calls are failing. Which fault domain should be investigated first?
A. IP phone
B. Cisco Unified Communications Manager Media Resources
C. voice gateways
D. network routers and switches
Correct Answer: B
QUESTION 19
Which two tools can be used to measure the quality of a VoIP call? (Choose two.)
A. QoS configuration tool
B. mean opinion score tool
C. bulk administration tool
D. jitter compensation tool
E. rFactor tool
Correct Answer: BE
QUESTION 20
Which three locations can an administrator import from to create users on Cisco Unity Connection? (Choose three.)
A. Bulk administration tool
B. LDAP
C. Cisco Unified Communications Manager via AXL
D. Outlook
E. Presence
F. Cisco Compatible Extensions
Correct Answer: ABC
High quality Cisco CCNA Collaboration 210-060 dumps pdf training resources which are the best for clearing 210-060 exam test, and to get certified by https://www.lead4pass.com/210-060.html Cisco CCNA Collaboration. If you are looking to get Cisco Implementing Cisco Collaboration Devices v1.0 certification by passing exam 210-060 then you can pass it in one go.
Best Cisco CCNA Collaboration 210-060 dumps vce youtube: https://youtu.be/sjpvchisvUg